Measuring medium: liquid

Measuring range: 0.1m~35m

Process connection: Flange ≥DN80

Process temperature: -40～200℃

Process pressure: -0.1～2.5MPa

Accuracy: ±2mm

Protection level: IP67

Frequency range: 123GHz

Power supply: two-wire (DC24V)/four-wire (DC12V~24V)/four-wire (AC220V)

Explosion-proof grade: Exia ⅡC T6 Ga / Exd IIC T6 Gb

Housing: Aluminum/Plastic/Stainless Steel

Signal output: 4~20mA/HART/RS485 Modbus

● Millimeter-wave radar, with a measurement accuracy of up to ±2mm, and a minimum blind area of 0.05m.

● The smaller antenna size satisfies the measurement of more working conditions.

● A variety of lens antennas, smaller launch angle, more concentrated energy, stronger echo signal, and higher reliability than other radar products under the same working conditions.

● With stronger penetrability, it can be used normally even if there is adhesion and condensation.

● The dynamic model has a larger range, and the measurement of low dielectric constant medium is more stable.

● Multiple measurement modes, the radar response time in fast measurement mode is less than 1s.

The radar level gauge is a continuous level measurement instrument. It is an advanced measuring instrument, suitable for solid materials, process containers, or strong dust that is easy to crystallize and dew. It has the advantages of low maintenance, high performance, high precision, high reliability and long service life. It can adapt to harsh production environments such as high temperature, high pressure and steam. The non-contact measurement method. Because it does not contact the measured medium, the radar level gauge is almost maintenance-free, free from damage, hanging materials, etc., no replacement of parts, long life, simple installation, simple calibration, and no material The influence of gas composition, dust, and temperature changes in the warehouse.

Radar level gauge has the characteristics of being not affected by the specific gravity of the medium, not affected by the change of the dielectric constant, and does not require on-site calibration. It has the advantages of accurate measurement, stable performance, high reliability, easy maintenance, and wide application range, so it can be used In many industries, power industry, steel industry, metallurgical industry, cement industry, petrochemical industry, paper industry, food industry, etc., as well as the occasions where dust, temperature, pressure change, inert gas and steam exist Level measurement of liquids, slurries and granular liquids in metal and non-metal containers or pipelines. In the process of industrial production, the radar level gauge can monitor the use of the liquid in the designated storage tank in real time, which is convenient for the on-site staff to observe.