Product size: 315mm*165mm*105mm

Working voltage: DC 24V (19-30V voltage range)

Working mode: continuous drainage monitoring, intermittent automatic sewage discharge

Measurement method: 90°scattering

Range: 0-1NTU, 0-10NTU

Zero drift: ≤±0.015NTU

Indication error: ≤±2% or ±0.015NTU, whichever is greater

Sewage discharge method: automatic discharge

Calibration method: Formazin standard solution calibration (factory calibration)

Water inlet pressure: 0.1Kg/cm3-8Kg/cm3, flow rate does not exceed 300mL/min

Digital output: RS485 Modbus protocol (baud rate 9600, 8, N, 1)

Analog output: 4-20mA

Storage temperature: -20℃-60℃

Working temperature: 0℃-50℃

Sensor material: composite material

Maintenance period: 12 months is recommended (depending on the on-site water quality and environment)

1. Small size, convenient for system integration

2. Less water consumption, saving daily operating costs

3. It still maintains high accuracy in the low range and can be applied to the turbidity measurement of drinking water after membrane water purification

4. Long maintenance cycle, automatic sewage discharge, saving daily operation and maintenance costs

This product is a low-range turbidity detection device, mainly used for turbidity monitoring of purified water, swimming pool water, tap water and factory water, municipal pipe networks and peripheral water. The ZDYG-2088 turbidity meter is for online monitoring of drinking water quality. It has the characteristics of ultra-low turbidity detection limit, high-precision measurement, maintenance-free equipment, ultra-saving water work and digital output. It can be widely used in direct drinking water, Turbidity monitoring of membrane filtered water, tap water and pipe network water.